Least three seconds until the STB key flashesĩ 9. When the remote control has switched to IR Not need to be turned on for the auto search. Note: this process may take several minutes to find The brand search method then auto search can be used. When the TV turns off or mutes, release TV orĭifferent brand the remote control will require If unsuccessful, the TV key will give a long flash and the remote control will revert to normal operation. If successful, the TV key will flash once and remain on.Three seconds until the STB key flashes twice andįor your TV. The STB does not need to be turned on for the No TV brandįor your TV from the list in section 10 TV IR When the remote control has switched to IR modeīack to exit the procedure. Three seconds to switch the remote control to By default, the remoteĬontrol is programmed with the most common brand To do this, your remote control must first learn the Keys on the remote control can be programmed to If the devices are still not paired, repeat the steps above.
#RCN SPEEDTEST ANDROID#
If unsuccessful, Reboot the android device using the reset button under the equipment.The reset button can be pressed using a paper clip. The IPTV box should automatically pair the remote.Your remote indicator light starts flashing amber this means it's trying to communicate with the IPTV box.If you don't see the screen, press the TiVo button
#RCN SPEEDTEST BLUETOOTH#
A screen that searches for Bluetooth devices should pop up.Place or hold your remote no more than 2 feet from the IPTV box.To pair the remote back to the IPTV box:.You'll notice it still works in IR (infrared) mode, but you can't use voice commands and the remote must be in the direct sight of the IPTV box.If this is your new remote, continue below If this is your original remote, remove the batteries so that it does not automatically pair to the equipment again. The activity indicator will flash red 3 times, indicating that the remote is now reset and not paired.The activity indicator lights up red and stays on If you are using a replacement remote and have the original, you need to Unpair the original, then pair the new one to the Android Box using the steps below: Please note: Only one remote can be paired with one Android Box at a time. If the remote is not paired with the device: If your remote can already control the Android TV device, then it is paired. The signals run on BlueTooth technology and will work through walls, around corners, etc.
Normally your TiVo S6A Remote will be paired with your TiVo Android TV device during initial setup.
0 kommentar(er)
